RAID-related error v0.3.1 - Printable Version +- Stresslinux community (https://www.stresslinux.org/community) +-- Forum: Stresslinux Main (https://www.stresslinux.org/community/forumdisplay.php?fid=1) +--- Forum: General discussion (https://www.stresslinux.org/community/forumdisplay.php?fid=2) +--- Thread: RAID-related error v0.3.1 (/showthread.php?tid=25) |
RAID-related error v0.3.1 - JAL - 06-09-2009 Hi all, Running Supermicro X7DWA-N with LSI MegaRAID SCSI 320-2E. During StressLinux it errors, it seems it is right after identifying the RAID card. Examples of last few lines... megaraid: probe new device 0x1000... megaraid: fw version:[514S] bios version:[H431] scsi5 : LSI Logic MegaRAID driver scsi[5]: scanning scsi channel 0 [Phy 0] for non-raid devices megaraid: aborting-1 cmd=12 <c=0 t=0 l=0> megaraid abort: 1:0[0:0], fw owner megaraid: 1 outstanding commands, Max wait 180 sec megaraid mbox: wait for 0 commands to complete megaraid mbox: reset sequence completed successfully megaraid: aborting-1 cmd=12 <c=0 t=0 l=0> ....repeating until... megaraid abort: 1:0[0:0], fw owner 5:1:0:0: scsi: Device offlined - not ready after recovery repeating with different addresses Any ideas on root cause? I've tried different cards with same result, as well as different FW version. RE: RAID-related error v0.3.1 - stresslinux - 08-04-2009 hi, maybe your hardware was to new for the running kernel, please try the new release 0.4.111. |